• Module LEDFLOODSTRIP "LFS": 45 cm.
• Consumption per module: 2,4W
• Maximum of modules with 1 power supply:
  35 units (15 m.)
• Number of SMD LED's per strip of 45 cm.: 30
• Circuit length (PCB): 45 cm.
• Voltage: 12 / 24V DC
• SMD LED's spacing: 15 mm.
• Circuit width (PCB):
  12,7 mm. for strip of 45º
  10 mm. for strip of 90º
• Viewing angle: 120º

TECHNICAL CHARACTERISTICS

• "LFS" with a single line of high brightness has been designed for indirect or direct lighting, both for indoor and outdoor applications.
  
• Available in the following colors: white, blue, green, red, yellow or Full color (only 12V) in any length.
  
• Has an excellent tolerance for vibrations and shocks, quite different from other forms of lighting.
  
• Has extremely low energy consumption and works with low voltage, thus minimizing the effects of corrosion and electrolysis.
  
• Is outfitted with SMD LED’s powered at 12 or 24V DC with a life expectancy of approximately 100,000 hours, corresponding to a normal use of 11 years.
  
• Ideal for direct lighting of building perimeters, as well as for steps, walk-ways, furniture, coves, kitchens, casinos, theme-parks, restaurants, bars, hotels, signage and much more.
  
• SMD LED's with approximately 500 mcd.
  
• LFS strips are housed in a Polycarbonate, fire retardant, clear square tube which is fixed inside of an anodized aluminum track. This can be attached with double sided tape such as that offered by 3M or may mechanically fastened using standard screws and hardware.
  
• The complete unit with the end caps attached and sealed with thermoretractive (heat-shrink) tube meets the standards of IP55 thus, allowing for outdoor use.